The problem was that despite being the 4GB capacity
drive, it showed only 900 MB of free space and was not storing data more than
this. Even on formatting the drive, it could store only 900 MB of data only. If
you are also facing the similar issue then here are the two solutions that you
should try to make your drive work fine again.
Note: Data in the drive will be lost.
First Solution:
1. Plug in
your pen drive
2. Type
diskmgmt.msc in Run box to open Disk Management.
3. Select your
drive’s partition.
4. Right click
on it and select the option of “Delete Volume” in it.
5. This will
delete the memory space allocated and free up the total space.
6. Now in the
empty space created again right click and select “Create Volume” to create the
space.
7. Select the
file system and format the partition to be able to use it again.
Second Solution:
If you are unsure of the first solution or if it
doesn’t work for you then try using this format utility called HP Format Disk
Utility which is actually a low level format utility.
Use this utility to format the drive and it shall be
working again normally.
No comments:
Post a Comment