How to Remove Write Protection from USB Pen Drive

This seems to be the problem of most of us these days and some of our readers who wanted to know the methods how they can remove the Write Protected error from their USB drives likePen Drives and memory cards.

What is Write Protected error and why it happens?

In the Write Protected error, we can’t write or copy any data in our flash drives and even can’tformat the drive.

There are many reasons that cause this problem, let’s see solutions of them.

Solutions:

•    First of all try to locate a small switch (if any, that you may have not noticed) at some place on the drive or memory card reader. This is the prime reason for this error. If there is one, switch it to the other side to turn the protection off.

•    Yes I know this problem is also occurring these days without this switch but not to worry. Just download this helpful software from here and run it to execute a “low-level format” on the drive. This software is quite handy and may take few attempts to actually remove the error.

If that low level format tool does not work, try another one Link.

•    The problem can also be caused by some virus activity so just get it scanned by some updated good anti virus which may solve your problem.

•    BUT if none of the methods listed above solves your problem then your pen drive might have gone corrupted, so just get it replaced.

 Hope any of the methods listed above solves your problem.

Update 1:

After the low level format, you may need to “Partition the drive“. Dont worry, partitioning a pen drive means allocating it its File System and Cluster Size that was lost after the Low Level Format.

For that:

1.     Run diskmgmt.msc in Run.

2.     In the disk management window, select the pen drive, right click on it and click on Format.

3.     Now choose the File System and Allocation Unit Size and do not check the boxes below.

Click OK and the drive will be reusable after this.

Update 2 (Better Solution):

Follow the steps in this post and just put the value 0 (zero) in step 5.

This will surely solve your problem now.

Update 3 (Solution Working):

Thanks to one of our readers Jim, who made us aware about the tool called Neo 9 (Download Neo 9), using which we can easily solve this write protection problem.

For transcend drive users, try the tool at this link, it has been found to work.